tier-0
-
NSX 4.1.2 introduces support for Generic Routing Encapsulation (GRE) tunnels for Tier-0 gateways and Tier-0 VRF gateways offering another standards-based option for “plumbing” network paths that lead traffic into and out of the Software-Defined Data Center (SDDC). In today’s short article I’ll go over configuring a GRE tunnel in order to facilitate communication between two…
-
Welcome back! In Part 1 we configured and prepared NSX to participate in a BGP EVPN control and data plane. In this part we continue with configuration of the VyOS router. Once both NSX and VyOS are configured we’ll verify that everything is working as intended. Lab Overview The lab environment for this exercise consists…
-
Recently I’ve been looking into setting up BGP EVPN between VMware NSX and VyOS router. I’m using VyOS quite a lot in labs and demos, often as the counterpart to a Tier-0 gateway, and wanted to find out if it was capable of a somewhat more advanced feature like BGP EVPN. It took some research…
-
NSX-T 3.0 comes with brand new features for logical networking in multisite environments. With NSX-T Federation the platform effectively receives a location-aware management, control, and data plane and this gives us, the implementers and architects, some very interesting new options when designing and installing NSX-T 3.0 in a multisite scenario. Although Federation affects all major…
-
NSX-T version 3.0 brings a new routing construct to the table: VRF Lite. With VRF Lite we are able to configure per tenant data plane isolation all the way up to the physical network. Creating dedicated tenant Tier-0 Gateways for this particular use case is now a thing of the past! With 100 VRFs per…
-
With NSX-T logical networking the Tier-0 uplinks become the central passage for all of the North-South traffic—i.e., traffic between the NSX-T logical networks and the physical network. A critical point in the NSX-T data plane and one that we might want to place under a magnifying glass from time to time. In this short article…
-
Welcome back! We’re in the process of building an NSX-T Edge – FRRouting environment. In part 1 we prepared the FRR routers by doing he following: Installed two Debian Linux servers Installed VLAN support Enabled packet forwarding Configured network interfaces Installed and configured VRRP Installed FRRouting In this second part we will first deploy the…
-
Welcome back! I’m in the process of setting up NSX-T in a stretched cluster environment. In part 1 I deployed the NSX manager cluster and configured the ESXi hosts as NSX transport nodes. The N-VDS was installed on the ESXi hosts and their vmkernel adapters migrated from the VDS to the N-VDS. In this second…